Nerf Longshot CS-6 – Custom Edition

July 6, 2011 at 8:53 pm (Informative) (, , , , )

This should be the last post I make for a while on my customised Nerf Guns. (Until I have my Titan up and running at least… finding hobby supplies in Sydney has proved difficult…)

Anyway, here’s another one of those “I’ve always wanted to do that” mods .

I still frequent department stores like Big W, KMart and Target et al to see what their Nerf range has to offer, and once in a while it comes up with some pretty tempting stuff. If you’ve been paying attention, you’d know most of those Department stores are coming up to Sales time for their Toy departments, and the representation for Nerf is the best it’s ever been.

Recons and Barricades for $25

Vulcans for $50

Stampedes for $55

and of course… the venerable Longshot for $45

If you’re reading this post and it’s still current, last I checked (on the weekend) There was still plenty of stock of all of the aforementioned guns.

Funnily enough the Longshot has sat at that price for quite a long time, and I actually picked mine up a few months prior to the sales.

And this is what I ended up doing to it.

I’d always disliked the treatment of the handgrip cum bipod of the Longshot the way it came out of the Hasbro design office. It’s just far too large, and somehow makes the user look like they’re compensating for a lack of something or other… so OFF WITH IT’S err… handgrip

So first, you need to dismantle the gun, if you are planning to mod your gun too, this is the time to do it. There are plenty of guides elsewhere so I won’t cover it here. Unscrew the halves of the bipod and you should be able to easily slide them out. These screws make for good spares!

Next you need to chop off the extraneous plastic used to hold the Bipod arms. I used a cutting wheel on a dremel, but you could easily use a grinding die too depending on what you’re used to. Cut the plastic until it’s flush with the Longshot handgrip and then cut an extra mm recess. You’ll need it to mount a cover to alleviate the big gap the deletion of the bipod brings.

(I realise at this point that pictures may help explain what is being done, but I hadn’t really documented it)

You now need to cover up this hole. The method I used is probably more along the lines of resourceful than what an actual hobbyist would do… as you can see the results sort of reflect. But it makes good use of what you have lying around at least.

What I did was cut out a paper template matching the gap left behind by the deletion of the bipod, then trace that onto a suitable piece of plastic. Thin sheet will be your best bet, the stuff you find on the bottom of reusable shopping bags is what I used, but use your imagination.

After trimming this to shape, I glued it on with hot glue, then sanded it back to make a flat(ish) surface. If I were doing this again, I would use a modeller’s putty or epoxy on the gap to achieve a better surface finish.

The last step is just to paint it whatever colour you like. Here I used Tamiya’s Metallic Grey – XF56 which is a pretty good match for the grey they use elsewhere on the Longshot.

I also used a mix of Metallic Grey and Flat Aluminium (XF11) to pick out the details on the body of the gun. If you’re the type to constantly update your collection of Nerf guns, you’d have noticed how nice the detailing is on some of the newer guns. The Longshot looks positively barren in comparison.

Next up a really simple one.

When I physically picked up the Longshot, the first thing I noticed was that, fully retracted, my hand can’t hold the gun comfortably. But fully extend it, and it starts looking pretty dorky with that huge box section out the back.

Simple solution… add a stop somewhere in between!

The Longshot stock adjustment works via a springloaded nub,  and it’s pretty easy to add another notch of adjustment. You only have to drill one hole as it only operates on one side.

It helps if the gun is still in pieces, but you can do this without pulling apart the whole gun if you don’t want. However, it will help if you take off the stock.

Really you can add as many adjustment holes as you like, just keep them in line between the two original points. If you drill accurately in between the two original spots you won’t have any trouble cutting into any structures behind. But if you do decide to add more, make sure you don’t drill into anything crucial.

So for those holes you’ll need a 6mm drill bit, but you’ll find if you just drill the holes and leave it at that, the stock is prone to sliding out if it’s jiggled. The little nub isn’t seating properly. To fix this, sand around the hole slightly to give it a chamfer. Enlarge the hole if you’re still having trouble, but do this with a round needle file, avoid a larger drill bit. If the hole gets too big the stock will sit very loose…

And that’s it, you now have a Longshot that’s exactly the same as mine… sort of…

Happy Modding!

Permalink Leave a Comment

Nerf Recon CS-6 Custom Yellow Edition

February 13, 2011 at 12:34 am (Informative) (, , , , , )

At the risk of turning this into another Nerf Blog, I will come straight out and say that this isn’t the intention, it’s just another part of my life that I like sharing with you all once in a while.

My Recon is close to my heart as it’s the first serious blaster I’ve owned. I think it was my second blaster after my Nitefinder. I’ve never liked the look of the stock that came with the Recon and ever since I saw the one that came with the Raider, I knew they belonged together (in my mind at least).  Thus began the long mission of finding a Raider Stock sold off as parts.

There were a few promising leads on eBay, but they were few and far between, and often the buyers were shooting for the moon when it came to an asking price. So that, I thought, was that. Fast forward half a year and my girlfriend was heading away for a secondment courtesy of her company, and I was lucky enough to be in between jobs, waiting for the new one to begin, so I took an early exit from the preceding job and joined her on a holiday.

As luck would have it, she would be heading off to the land where all Toys are born, the United States.  I could finally obtain a cheap Raider Stock complete with a Raider. Why would I spend extra for a Raider when I only wanted the stock? Well I had my own plans for customising the Raider, but that’s another story for another day.

So it came to pass that I brought home a Raider (and a Marauder Long Sword, also thanks to KMart Times Square) to add to my now sizeable collection, rivalled only by Benny.

Since I came home to a new job, it was obvious that I wouldn’t have much time for my personal hobbies. So I slowly collected the materials (really just the spray paints) until it came to a dreary day in February, when I finally got off my butt. About 4 weeks from when I came home with the Raider.

I have a bad habit of rushing jobs when I’m keen, but I eventually settled down and paced myself, and all in all, I’m happy with what ended up being one days work which mostly entailed alot of waiting time for paint to dry. Sure if you look closely it’s not that nice a job, but in the end it’s still a Toy, not an art piece.

Now I’ll let the pictures do the talking, the finished job.

You’ll also notice a few small flourishes I added a long time ago just with the use of a silver marker. It’s amazing what a little detailing can do.

Anyway if you like what you see, here’s what you need to do to have one of your own.

Send a cheque for $50AUD to… I’m just kidding…

It’s pretty straight forward the steps you need to take, be familiar with spray painting, masking off, and a little brush painting will be called upon too.

A few helpful hints, the paint I used was Tamiya Spray number 16, which gives quite a nice color match with the Nerf Yellow, but is abit expensive (about $10AUD for a can, and this was barely enough for the job), and remember it’s just the stock. I will experiment in future with different shades of Tamiya Yellows or even the spray paints at Bunnings.

If you’re not patient enough to surface prep, remember 2 things.
a) you will need to be careful with the painted gun as the paint can chip/flake easier.
b) be patient enough to slowly build up the colour layer by layer. You cannot get proper coverage in one go. All you will end up with is the paint welling in all the crevices, a stock that’s still blue and no more spray paint.
Make one pass or two, then let it dry, and repeat the process until you build up opacity.

Lastly the grey on the butt of the Raider stock is a very good match with Tamiya Metallic Grey, XF56. If mixed well it will blend in seamlessly.

If you aren’t satisfied with the coat of spray paint, a little brush painting goes a long way. Remember, I achieved these results with little more than a few hours of work.

And that’s pretty much it! One properly colour matched Nerf Recon CS6, and one stockless Raider which kinda makes it look like a shotgun… hmmm… *wiink*

Permalink Leave a Comment